Produk Insulation Protection atau Raysulate Raychem ini digunakan pada Panel Tegangan 1 sampai 36 kV, Sisi Trafo, Gardu Portal dan substation. Seperti Heatshrink Tubing Insulation Busbar (LV,MV,HV), Cover protection for Gardu Portal 20kV pada gardu induk (Outdoor) atau busbar yang ada di dalam panel incoming maupun panel penyulang (Indoor) yang berfungsi sebagai proteksi busbar atau conductor terhadap bahaya flashover yang sering terjadi pada lingkungan di Indonesia, seperti flashover yang diakibatkan oleh tingkat polusi yang tinggi, kadar kelembaban yang tinggi, kadar garam yang tinggi dan sentuhan sesaat binatang.
Insulation & Cover Protection
Unduh Brosur
Wildlife and Asset Protection Catalog Part 1Wildlife and Asset Protection Catalog Part 2High Voltage Busbar Insulation Tape 1High Voltage Busbar Insulation Tape 2Insulation Sheets HVISLVIT Raychem Busbar Insulation TubingBusbar Insulation Tubing - BBITBusbar Insulation Tubing BPTMHeat Shrinkable Busbar Insulation Tubing BPTMHeat Shrinkable Wraparound Sleeve CRSMINSULATION PROTECTION
COVER PROTECTION FOR GARDU PORTAL
Cover protection for Gardu Portal 20kV pada gardu induk (Outdoor) atau busbar yang ada di dalam panel incoming maupun panel penyulang (Indoor) yang berfungsi sebagai proteksi busbar atau conductor terhadap bahaya flashover yang sering terjadi pada lingkungan di Indonesia, seperti flashover yang diakibatkan oleh tingkat polusi yang tinggi, kadar kelembaban yang tinggi, kadar garam yang tinggi dan sentuhan sesaat binatang.
PRODUCT TYPE
| Wildlife and Asset Protection Catalog | Cover Protection |
| High Voltage Busbar Insulation Tape-1 | Insulation Protection |
| High Voltage Busbar Insulation Tape-2 | Insulation Protection |
| Insulation Sheets HVIS | Insulation Protection |
| LVIT Raychem Busbar Insulation Tubing | Insulation Protection |
| Busbar Insulation Tubing - BBIT | Insulation Protection |
| Busbar Insulation Tubing BPTM | Insulation Protection |
| Heat Shrinkable Busbar Insulation Tubing BPTM | Insulation Protection |
| Heat Shrinkable Wraparound Sleeve CRSM | Insulation Protection |
PRODUCT DESCRIPTION : WILDLIFE AND ASSET PROTECTION
- HVBT High Voltage Busbar Insulating Tape
- BBIT / BPTM Busbar Insulating Tubing
- HVIS High Voltage Busbar Insulating Sheet
- RRBB Interphase Insulating Barrier Board
- Superior UV resistance
- Insulates up to 35 kV when two layers are applied at 2/3 overlap
- Compatible with all products in the TE’s Raychem medium voltage insulation enchancement system
- Easy to apply using readily available equipment
- Suitable for both indoor and outdoor use
- Excellent anti-tracking properties
- Continuos operating temperature up to 90° C
- Extremely versatille and flexible at temperatures as low as -40° C, the 30% shrink ratio enables coverage of almost any shape
- Good thermal emissivity and contact with busbars means no derating is required
- Can be stored indefinitely at temperatures up to 50° C without loss performance
HVBT High Voltage Busbar Insulating Tape
PRODUCT DESCRIPTION : HIGH VOLTAGE BUSBAR INSULATION TAPE-1
- Compatible with all TE’s Raychem MV insulation enhancement systems
- Easy to apply using readily available equipment
- Indoor and Outdoor use
- Anti-tracking properties
- Continues operating temperature up to 90°C
- Versatile and flexible at temperatures as low as -40°C.
TE Connectivity’s (TE) Raychem high voltage busbar insulation tape
(HVBT) is a heat-shrinkable, adhesive-coated tape which provides
insulation enhancement and protection against accidentally induced
flashover. TE’s Raychem HVBT tape is designed to combine the integrity of a heat-shrinkable tubing with the versatility of a wraparound product.
HVBT tape is quick and easy to install. Upon application of heat the tape shrinks and the adhesive lining melts amalgamating the overlapping layers, to produce a complete lap to lap seal. A single layer of HVBT tape, two-thirds overlapped, will provide AC voltage withstand (flashover protection) to at least 17.5 kV increasing to 36 kV if a second layer
is applied.
Although HVBT tape will adhere to itself and other insulating materials, it will not adhere to metal or porcelain, allowing easy removal for maintenance.
HVBT tape offers a simple and effective solution to the problems of
retrofit insulation of busbars, particularly where existing equipment
cannot be dismantled. It can be used for indoor and outdoor applications and is easily installed over a wide variety of shapes, including complex connections.
PRODUCT DESCRIPTION : HIGH VOLTAGE BUSBAR INSULATION TAPE-2
- Compatible with all other products in the Raychem MV insulation enhancement system
- Easy to apply using readily available equipment
- Excellent anti-tracking properties
- Continuous operating temperature up to 90˚C
- Extremely versatile and flexible at temperatures as low as -40˚C, the 30% shrink ratio enables coverage of almost any shape
- Good thermal emissivity and contact with busbars means no derating is required
- Suitable for both indoor and outdoor use
- Manufactured from non-halogen based materials, reducing the toxic andcorrosive effects in the event of fire
- Can be stored indefinitely at temperatures up to 50˚C without loss of performance
TE Connectivity’s HVBT is a heat-shrinkable, adhesive-coated tape which provides insulation enhancement and protection against accidentally induced flashover. HVBT tape is designed to combine the integrity of a heat-shrinkable tubing with the versatility of a wraparound product.
HVBT tape is quick and easy to install. Upon application of heat the tape shrinks and the adhesive lining melts amalgamating the overlapping layers, to produce a complete lap to lap seal. A single layer of HVBT tape, two-thirds overlapped, will provide AC voltage withstand (flashover protection) to at least 17.5 kV increasing to 36 kV if a second layer is applied.
Although HVBT tape will adhere to itself and other insulating materials, it will not adhere to metal or porcelain, allowing easy removal for maintenance
PRODUCT DESCRIPTION : INSULATION SHEETS HVIS
- Compatible with all other products in the Raychem MV insulation enhancement system
- Easy to install on site using a gas torch or hot air device
- Manufactured from a non-halogen based material, noxious and corrosive effects are greatly reduced in the event of a fire
- Excellent anti-tracking properties
- Excellent UV and weather resistant properties make HVIS suitable for indoor or outdoor use
- Can be stored indefinitely at temperatures up to 50 °C without loss of performance
Raychem adhesive coated, heat-shrinkable sheet HVIS provides insu lation enhancement and pro tection against accidentally induced discharge. When heated the Raychem sheet HVIS shrinks in two directions to tightly conform to complex shapes. Raychem void-filling mastic S1061, can be added to ensure that even protruding shapes are insulated. Raychem sealing mastic, S1085, can also be applied to provide an environmentally sealed connection. The sheet can be cut to size on site and loosely secured in place with clamps and brackets. The clamps and brackets can be ordered separately as kits Raychem HVIS-TOOLS-xx. Once installed, the clamps and brackets can be removed and re-used. Raychem sheet HVIS will provide flashover protection up to 17.5 kV or up to 25 kV if the void-filling mastic is applied underneath the sheet or up to 36 kV if a double layer of HVIS is used. Re-usable joint covers can also be made to allow access or maintenance when required.
Applications
Raychem sheet HVIS will cover almost any size or shape of busbar joint, making it ideal for insulating busbar tees, elbows and other connections where tubing and tape cannot be used.
PRODUCT DESCRIPTION : LVIT RAYCHEM BUSBAR INSULATION TUBING
- Compatible with all other products in the Raychem low voltage insulation range
- Flame retarded
- Continuous operating temperature rating up to 105 °C High shrink ratio reduces inventory and simplifies product selection
- High shrink ratio reduces inventory and simplifies product selection
- Suitable for indoor and outdoor applications
- Electrical and mechanical performance are retained after cleaning with hydrocarbon solvent
- Good thermal emissivity and contact with busbars means no derating is needed
- Can be stored indefinitely at temperatures up to 50 °C without loss of performance
- UL approved
LVIT is a black, medium wall, flame retarded heat-shrinkable tubing suitable for insulating busbars up to 1 kV. This highly flexible tubing can be used on a variety of curved and bent busbars of both circular and rectangular cross-section. LVIT tubing can be easily installed in a factory environment using an oven or in the field using a gas torch or hot air. LVIT tubing is manufactured in UV resistant material, making it suitable for both indoor and outdoor applications.
Applications
LVIT is suitable for both enclosed and exposed busbars and for connections in switchgear, substations, motor control centers and other electrical equipment.
PRODUCT DESCRIPTION : BUSBAR INSULATION TUBING - BBIT
- Exceptional insulation and long term reliability even at high continuous operating temperatures
- Suitable for indoor and outdoor use
- Excellent anti-tracking properties
- Flame retardant and halogen-free
- Good thermal emissivity
- Long shelf life and can be stored at temperatures up to 50°C without loss of performance
- REACH and RoHS compliant
- UL approved
TE Connectivity’s (TE) Raychem BBIT thick-wall, heat shrink tubing provides insulation enhancement and protection against flashover and accidentally induced discharge. Particularly useful in confined
spaces, TE’s Raychem BBIT tubing can be used on both circular and rectangular copper or aluminium busbars.
On application of heat, the tubing shrinks snugly over the busbar profile ensuring that the required minimum wall thickness is obtained. The BBIT tubing can be installed easily during large scale production using an oven or in the field using a gas torch or hot air. The BBIT tubing is manufactured from a halogen-free based polymer which has excellent performance in high voltage environments and reduces the noxious and corrosive effects in fire situations.
The use of the BBIT tubing allows equipment designers the freedom to reduce air spacing between busbars such as in the manufacture of switchgear cabinets where space is at a premium. The BBIT tubing provides flashover protection up to 36 kV.
PRODUCT DESCRIPTION : BUSBAR INSULATION TUBING - BPTM
- Exceptional insulation and long term reliability even at high continuous operating temperatures
- Extremely durable, resists damage from solvents, ultraviolet light, weathering, mechanical impact and general wear and tear
- Suitable for indoor and outdoor use
- Excellent anti-tracking properties
- Can be stored indefinitely at temperatures up to 50°C without loss of performance
- REACH and RoHS compliant
TE Connectivity’s (TE) Raychem medium wall, heat-shrinkable BPTM tubing provides insulation enhancement and protection against flashover and accidentally induced discharge.
Particularly useful in confined spaces BPTM tubing can be used on both circular and rectangular copper or aluminium busbars. On application of heat the tubing shrinks snugly over the busbar profile ensuring that the required minimum wall thickness is obtained. TE’s Raychem BPTM tubing can be installed easily during large scale production using an oven or in the field using a gas torch or hot air.
BPTM tubing is manufactured from a non-halogen based polymer which
has excellent performance in high voltage environments and greatly
reduces the noxious and corrosive effects in fire situations.
The use of BPTM tubing allows equipment designers the freedom to
reduce air spacing between busbars, such as in the manufacture of
switchgear cabinets where space is at a premium. BPTM tubing provides
flashover protection up to 25 kV
PRODUCT DESCRIPTION : HEAT SHRINKABLE BUSBAR INSULATION TUBING BPTM
- Compatible with all other products in the Raychem low voltage insulation range
- Flame retarded
- Continuous operating temperature rating up to 105 °C High shrink ratio reduces inventory and simplifies product selection
- High shrink ratio reduces inventory and simplifies product selection
- Suitable for indoor and outdoor applications
- Electrical and mechanical performance are retained after cleaning with hydrocarbon solvent
- Good thermal emissivity and contact with busbars means no derating is needed
- Can be stored indefinitely at temperatures up to 50 °C without loss of performance
- UL approved
LVIT is a black, medium wall, flame retarded heat-shrinkable tubing suitable for insulating busbars up to 1 kV. This highly flexible tubing can be used on a variety of curved and bent busbars of both circular and rectangular cross-section. LVIT tubing can be easily installed in a factory environment using an oven or in the field using a gas torch or hot air. LVIT tubing is manufactured in UV resistant material, making it suitable for both indoor and outdoor applications.
Applications
LVIT is suitable for both enclosed and exposed busbars and for connections in switchgear, substations, motor control centers and other electrical equipment.
PRODUCT DESCRIPTION : HEAT SHRINKABLE WRAPAROUND SLEEVE CRSM
- High electrical characteristics to achieve requirements for low voltage applications
- Medium wall, Cross-linked polyolefin. UV stabilized and not reinforced
- Halogen-free material content, non-corrosive and non-toxic smoke in event of fire & free of lead and aluminium
- Available inline coated with hot melt adhesive or uncoated
- Wraparound sleeve used for repair of damaged cable jackets insulation and for rejacketing of low voltage joints
- Compliant to RoHS and REACH regulations
- Color black, >3 : 1 shrink ratio
- Unlimited shelf-life
TE Connectivity’s (TE) Raychem CRSM heat-shrinkable wraparounds are
a fast and reliable permanent cable repair and sealing system. The cable repair sleeve is quickly fitted in place by means of its rail and channel closure. A moisture-proof, insulating and tight-fitting repair is then obtained in one step by heating, which makes the sleeve diameter shrink and the inside sealant coating melt, flow and fill the damaged cable area.
The CRSM wraparound sleeves will fit a wide range of different cable diameters. The sealant exhibits excellent bonding and sealing characteristics to all substrates commonly used in the various cable and oversheath constructions, such as polymeric, rubber, lead and aluminium. CRSM wraparounds are made of an abrasion resistant semi-rigid material and are a result of our extensive capability in materials technology.
CRSM are used in low voltage applications for insulation and sealing against moisture of cable joints and in low and medium voltage applications for sealing and mechanical protection, for outer rejacketing and for cable repair.
The material content of the CRSM tubings is halogen-free and stabilized against UV irradiation. CRSM tubings have proven their long-term reliability in harsh climatic conditions. CRSM tubings have an unlimited shelf life when stored under normal conditions.
Copyright @2025 PT. Karya Utama Globalindo